Chapter 11 Results; Raw Measurement Data - Thermo Scientific Varioskan User Manual

Chapter 11
Results
After you have created the session (the protocol and the plate layout), you
can execute it (see Chapter 5: Executing a Session"). The instrument
performs the measurements as defined in the protocol and sends the
measurement data to the software.
Calculations and other data handling procedures are made to the raw data
as defined by the user (see Adding calculations" on page 143).
Raw measurement
When the measurement is finished, the Execution Progress dialog is closed
and the Results view shows the measurement results in plate layout format
data
(Table).
You can view the measurement results in the plate layout and list views.
Select the measurement in the Results tree and select either the Table or
List tab, respectively.
In the table view, use the Show options check boxes to select the information
you want to display for each well in addition to the sample name, dilution
and raw measurement data. Other options are group name, sample type,
dilution/concentration units and replicate number. Other viewing options
are:
® ®
Thermo Fisher Scientific Thermo Scientific SkanIt Software for Varioskan User Manual 203