Advertisement
Plate Layouts
Editing a plate layout
Editing sample properties
and adding samples with
Sample Properties
134
Thermo Scientific SkanIt
You can change the order of the values in the larger box with the arrow
buttons on the right and remove values using the Remove button.
When you have entered the concentration or dilution series information,
click OK. The software offers to rename the samples automatically.
The Dilutions/Concentrations dialog is closed and the information is
added to the Fill Wizard dialog.
If the dilution or concentration information was entered incorrectly, the
software prompts you to correct the data. You have to return to Fill Wizard
and select Generate series again.
Example 8-2 Adding a concentration series
To enter the concentration series "1, 10, 100, 1000, 10000" with two
replicates for each concentration, make the following selections in the
Concentrations dialog:
•
Select Series.
•
Initial value: 1.00000
•
Operators: Multiply (*)
•
Step By: 10
•
No. of samples: 5
•
No. of replicates: 2
Click OK. Five calibrators with two replicates each are added to the Fill
Wizard dialog.
You can edit the properties of the samples or define new samples using the
Sample Properties panel.
®
®
Software for Varioskan
User Manual
Thermo Fisher Scientific
Hide quick links:
Advertisement
