Saving Manually; Measurement And Calculation Reports - Thermo Scientific Varioskan User Manual

Saving manually

Measurement and
calculation reports
Thermo Fisher Scientific
The plate id placeholder always uses the plate name of the first plate in
naming the file or folder. The placeholder is mainly intended for use
with the Automation Interface when one plate is used.
Note If you encounter problems with the measurement and
calculation data files, you may need to change the number settings
on your PC. The Decimal symbol should be determined as ."
and the Digit grouping symbol preferably as ," and not .". For
more information, see Microsoft Windows settings" on page 20.
When you want to quickly export the measurement or calculation data of
a particular run, use the Quick Export option. The Quick Export will not
appear in the Results tree. In the Results tree, select the step containing
the data you want to save. Select Data Processing > Quick Export, click
the button on the Results action panel, or right-click the step, and select
Quick Export. The Export Options dialog is opened.
Select which columns are shown in the list.
• Export mode - Select the format in which the data will be laid out in
the file: a list or a matrix (table view). If you select List, you can select
the data columns from the Columns list. The exported list retains the
selections you made in the list view, including the sorting order and
filtering. If you select Matrix, only the measurement data is exported.
Click OK. Enter a name for the file and select the folder where the file will
be saved. The file can only be saved in text format (.txt). The file contains
the data in columns, separated by tabulators.
You can create a more detailed measurement and calculation data report
and print, save or email it each time the session is executed by adding a
Report step to the Results tree after the measurements and calculations.
Thermo Scientific SkanIt

Measurement and calculation reports

® ®
Software for Varioskan User Manual
Results
213