Spectral Analysis; Spectral Peak Search - Thermo Scientific Varioskan User Manual

Data Processing Parameters

Spectral analysis

Spectral analysis

Spectral peak search

174 Thermo Scientific SkanIt
Un_0001_01 1/3
The spectral analysis calculation is used for handling spectral scanning
measurement data. The spectral analysis calculation assumes that there is
only one measurement point for each wavelength in a well. In multipoint
measurements, the data must be reduced to only one measurement value
per wavelength before spectral analysis can be performed.
The wavelength range in spectral reduction is from 200 to 1,000 nm.
Select Data Processing > Spectral Analysis, click the
Results action panel, or right-click the measurement in the Results tree.
The spectral peak search seeks all peak wavelengths with an intensity higher
than the given threshold value. You can also define a wavelength area for
which this calculation is performed (Figure 10-3).
® ®
Software for Varioskan User Manual
1.019
button on the
Thermo Fisher Scientific