Advertisement
Letters permitted with
SkanIt Software
Installing
Thermo Fisher Scientific
Start > Settings > Control Panel > Power Options > Power Schemes > Turn
off hard disk > Never
You are only allowed to use the letters a to z and A to Z with SkanIt
Software. Scandinavian letters (å, ä, ö, æ, ø, and so on) or any other
non-standard letters should not be used with SkanIt Software.
This section will guide you through the software installation procedure.
Note SkanIt Software cannot be installed on a network drive.
Note You have to be logged on to your computer with
administrator privileges to install SkanIt Software.
Note You can stop the installation procedure at any stage by
pressing the Cancel button. The setup will roll-back your system
to the initial state.
1.
Check that SkanIt Software is registered and you have the installation
code which is needed in Installing the software" on page 26, Step 2.
For more information about registering SkanIt Software, see
Registering SkanIt Software" on page 19.
2.
Check that the PC requirements in Table 2-1 are met.
3.
Insert the SkanIt Software installation CD into the CD-ROM drive
of your PC.
4.
The SkanIt Software Setup window appears automatically. If it does
not, launch the installation from the CD; double-click the Setup.exe
file.
Thermo Scientific SkanIt
Installing SkanIt Software
®
®
Software for Varioskan
User Manual
Installing
21
Hide quick links:
Advertisement
