Advertisement
Viewing results as curves
Saving measurement
and calculation data
Saving automatically
Thermo Fisher Scientific
For more information on effective dose, see Effective dose" on page 164.
The measurement and calculation results are shown as curves for kinetic
and spectrum scanning measurements. You can enlarge a single curve or
several curves and show them in a separate window.
1.
Select a kinetic or spectrum scanning measurement or its calculation
in the Results view.
2.
Show the results in the Table format.
3.
•
Select a single well.
•
Select several wells by pressing the Ctrl key or by painting an area.
You can also paint several areas by pressing the Ctrl key.
4.
Right-click and select Show Graph. The Curve dialog opens showing,
for example, curves for several wells.
You can save and export the numeric measurement and calculation data to
other systems either automatically each time the session is executed or
manually afterwards.
When you want to save data from a particular measurement or calculation
each time the session is run, use the Save step. To create a more detailed
report of the entire run, you can use the Report step as described in
Thermo Scientific SkanIt
Saving measurement and calculation data
®
®
Software for Varioskan
User Manual
Results
211
Hide quick links:
Advertisement
