Thermo Scientific Varioskan User Manual page 86

Protocols
Editing a protocol
84 Thermo Scientific SkanIt
New steps appear after the step selected by clicking or, if no step has been
selected by clicking, after the last step in the step tree. You can move steps
up and down in the tree structure using the arrows in the top-right corner
of the action panel. You can rename steps using the
them using the
In the example above, the Incubate1 step is performed first, then the
Photometric1 measurement is performed only for the measurement area
defined by the area definition step Area1 followed by the Fluorometric1
measurement performed for Area2. The Dispense1 and Shake1 steps are
applied next for the entire layout, followed by KineticLoop1, which includes
the Dispense2 and Photometric2 steps.
® ®
Software for Varioskan User Manual
button.
button and delete
Thermo Fisher Scientific