Figure 8-1 Plate Layout Editing Window - Thermo Scientific Varioskan User Manual

Plate Layouts
Working with plate layouts
126 Thermo Scientific SkanIt
• If the Use existing plate layout option was selected, you only need to
ensure that the plate layout matches the actual plates. If it does not, you
will have to edit it.
• If the Create new plate layout option was selected, the empty plate
layout is based on the selected plate type. You can start editing it.
• If the Fill layout with Unknowns was selected, all wells in the plate
are filled with unknown samples. You can edit the layout, if you want.
Figure 8-1. Plate layout editing window
• 1 - Plate layout is selected
• 2 - Several plates can be defined
• 3 - Samples are added with Fill Wizard
® ®
Software for Varioskan User Manual Thermo Fisher Scientific