Next Steps - Thermo Scientific Nicolet Summit User Manual

Unpack and Get Started with the Spectrometer

Next Steps

6 Nicolet Summit User Guide
6. Insert a sampling accessory
To install the optional Everest ATR accessory or iD1 Transmission accessory, grasp the
accessory by the front and rear handholds and lower the accessory onto the spectrometer.
Sampling accessories fit over two alignment pins on the spectrometer baseplate and are
held in place by strong magnets.
• For details on installing an accessory, see
• For details on using the Everest ATR accessory, see
Accessories.
Congratulations! You are ready to start measuring and analyzing samples.
• For an overview of OMNIC Paradigm software, see
software.
• For a step-by-step guide to identifying an unknown sample, see
Unknown Sample with
• For details on using workflows to automate your work, see
© 2019 Thermo Fisher Scientific Inc. All rights reserved.
Microsoft and Windows are either trademarks or registered trademarks of Microsoft Corporation in the
United States and/or other countries. All other trademarks are the property of Thermo Fisher Scientific
Inc. and its subsidiaries.
Install a Sampling
ATR.
Accessory.
Sampling
Welcome to OMNIC Paradigm
Identify an
About Workflows.
Thermo Scientific