Table of Contents
Advertisement
CDM-550T Satellite Modem
KST-2000A FSK Remote Operation
1.2.29
ODU,ENABLE,INFO)
FIRMWARE INFO:
FW: 9364-1-
Note: The blinking cursor is on the M&C. Use the [↑] [↓] keys to view additional
firmware information for the Up Converter, Down Converter, and HPA.
1.2.30
(ODU,ENABLE)
STATUS: PS:OK RF:OK UC:OK
This menu displays summary information. The operator may select 1 of 6
detailed status windows. Use the [←] [→] keys, then press <ENTER>.
The cursor may be moved over 6 of the 7 status parameters to view more
detailed status information. These screens are continually updated while being
viewed.
AG
DC
HP
LNA
PS
RF
UC
P/Supplies: 7V:OK 17V:OK
REF: WARM 72M:OK RANGE:NA
SRC:INT
UPCONV STATUS: OVRTMP:OK
SSYN:OK
HPA: OVERTEMP:OK
-5V:OK
DNCONV STATUS: OVRTMP:OK
LSYN:OK
M&C
VER: 01.01.01
STATUS
LNA:OK AG:OK HP:OK DC:OK
= AGC Status
= Down Converter
= HPA Status
= Low Noise Amplifier (No further detail)
= Power Supplies
= Reference
= Up Converter
-7V:OK 12V:OK
XLK:NA
KSYN:OK
AGC STATUS:
EIP:OK
LOOP:OK
IIP:OK
BIAS:OK
KSYN:OK
10
FW (Firmware)
PHASE:NA
PRG:OK
9.75V:OK
PRG:OK
PRG:OK
Revision 0
MN/CDM550T.AA1
FT
= Fault
NA
= Not Applicable
OK
= OK – No Fault
MN/CDM550T.AA1
Advertisement
Chapters
Table of Contents
