Configuration | Routing Pages; Configuration | Routing | Routes - Comtech EF Data CDM-625A Installation And Operation Manual

Advanced satellite modem (18 kbps – 25 mbps)

Hide thumbs Also See for CDM-625A:

Table of Contents

CDM-625A Advanced Satellite Modem

Ethernet-based Remote Product Management

Configuration | Routing Pages

The nested Routes, IGMP, and DHCP pages are accessible only to Admin users and

when the optional IP Packet Processor card is installed and enabled

Click the Routes, IGMP, DHCP, or DNS tab to continue.

Use this page to enter static routes into the IP Packet Processor to route IP traffic over the

satellite or to another device on the local LAN.

Route Table (Edit)

This section displays and allows you to edit all current Route Table entries. Note the following:

Dest.IP/Mask

for complete details about using conditional access pages.

Figure 7-15. Configuration | Routing | Routes page

This is the internal table index that is automatically assigned and cannot be edited.

This label helps to maintain the network. Enter a l abel string in this text box. The assigned

name must be unique and cannot contain any whitespace.

Enter a Destination IP Address/Mask in the form XXX.XXX.XXX.XXX/YY.

Use the drop-down list to select the Interface as toWAN or toLAN.

Enter t he des ired N ext H op I P Address f or toLAN routes. N ote t hat no N ext H op ent ry i s

needed for toWAN routes.

Table of Contents