Transfer Components - Suzuki Liana RH413 Service Manual

5B-37 Manual Transmission/Transaxle:
"A": Thread lock cement 99000–32110
Tightening torque
Final gear bolt (for 2WD) (a): 90 N·m (9.0 kgf-m,
65.0 lb-ft)
Final gear bolt (for 4WD) (a): 73 N·m (7.3 kgf-m,
53.0 lb-ft)

Transfer Components

1 Transfer output case
. : Apply sealant 99000-31260 to mating
surface of output case and rear case.
2. Transfer output flange
3. Transfer output flange oil seal
: Apply grease 99000-25010 to oil seal lip.
4. Output No.2 bearing
5. Output No.1 bearing
6. Output shaft
7. Output No.3 bearing
8. Drive gear bearing
9. Drive gear
10. Pinion bearing
11. Pinion spacer
12. Pinion bearing shim No.1
13. Pinion bearing shim No.2
14. Bevel gear set
15. Bevel pinion nut
: After tightening nut to specified torque,
caulk nut securely.
16. Transfer output flange nut
: After tightening nut to specified torque,
caulk nut securely.
I2RH01520077-01
S3RH0A5206026
I3RH0A520029-01
17. Differential case
18. Final gear
19. Final gear bolt (for 4WD)
: Apply thread lock 99000-32110 to all
around thread part of bolt.
20. Transfer output case bolt
: Tightening torque
: Do not reuse.
: Apply transaxle oil.