Direct Clutch Inspection - Suzuki Liana RH413 Service Manual

1. Direct clutch assembly
2. Oil pump assembly
3. Oil hole

Direct Clutch Inspection

Clutch Discs, Plates and Retaining Plate
Check that sliding surfaces of discs, separator plates
and retaining plate are not worn hard or burnt. If
necessary, replace.
NOTE
• If disc lining is exfoliated, discolored,
replace all discs.
• Before assembling new discs, soak them
in A/T fluid for at least two hours.
Direct Clutch Return Spring Subassembly
Measure free length of direct clutch return spring.
Direct clutch return spring free length
"a": 36.04 mm (1.419 in.)
NOTE
Do not apply excessive force when
measuring spring free length. Perform
measurement at several points.
I2RH0B510171-01
S3RH0A5106033
Direct Clutch Piston
Shake direct clutch piston lightly and check that check
ball (1) is not stuck.
Blow in low pressure air (Max. 100 kPa, 1 kg/cm
to check ball to check that there is no leakage.
I2RH0B510172-01
Automatic Transmission/Transaxle: 5A-119
"a"
I3RH0A510025-01
2 , 15 psi)
I2RH0B510174-01