Suzuki Liana RH413 Service Manual page 422

3B-9 Differential:
Differential case
1) After applying differential oil to side gears (4),
pinions (5), pinion shaft (3), side washers (1) and
pinion washers (2), install them in differential case
(6).
NOTE
Used left and right differential side washers
are not interchangeable.
2) Check pinion gear (1) for smooth rotation.
3) Align pinion shaft hole position with differential case
and drive in differential pinion shaft pin till they are
flush with end surface of case.
Special tool
(A): 09922-85811
4) Apply thread lock cement to thread of bevel gear
bolts (1).
5) Put bevel gear (2) on differential case (3) and fasten
them with 8 bolts (1) by tightening them to specified
torque.
I3RH01322030-01
CAUTION
!
Use of any other bolts than that specified is
prohibited.
"A": Thread lock cement 99000–32110
Tightening torque
Bevel gear bolt (a): 73 N·m (7.3 kgf-m, 52.0 lb-ft)
I3RH01322031-01
I3RH01322032-01
I3RH01322033-01