Hvac Control Module Removal And Installation; Air Intake Control Actuator Removal And Installation - Suzuki Liana RH413 Service Manual

HVAC Control Module Removal and Installation

Removal
1) Disconnect negative (–) cable at battery.
2) Gently remove instrument panel center garnish trims
(1) from instrument panel.
NOTE
Be careful not to damage instrument panel
center garnish trims.
1
3) Remove screws (1).
4) Tilt instrument panel center garnish (2) and pull it
through instrument panel.
1
1
5) Disconnect electrical connectors from HVAC control
S3RH0A7106010 module, audio system and hazard switch.
6) Remove instrument panel center garnish.
7) Remove audio system (1) from instrument panel
center garnish.
8) Remove screws and HVAC control module (2) from
instrument panel center garnish.
1
Installation
Reverse removal procedure to install HVAC control
I3RH0A710013-01
module.
Air Intake Control Actuator Removal and
Installation
Removal
1) Disconnect negative (–) cable at battery.
2
2) Remove glove box.
3) Disconnect air intake control actuator connector from
air intake control actuator (1).
4) Remove air intake control actuator from blower unit
(2).
I3RH0A710014-01
Installation
Reverse removal procedure to install air intake control
actuator.
Heater and Ventilation:
2
2
7A-17
1
I3RH0A710015-01
S3RH0A7106012
1
I2RH01710022-01