Ebd Warning Lamp (Brake Warning Lamp) Comes On Steady - Suzuki Liana RH413 Service Manual

4E-20 ABS:
Step
4 1) Measure resistance between ground terminal of monitor
coupler and body ground.
Is resistance less than 2

EBD Warning Lamp (Brake Warning Lamp) Comes ON Steady

Wiring Diagram
[A]: ABS hydraulic unit / control module connector E15
1. Battery
2. Main fuse box
3. Ignition switch
4. Circuit fuse box
Circuit Description
EBD warning lamp (brake warning lamp) is controlled by parking brake switch, brake fluid level switch and ABS control
module / hydraulic unit assembly through lamp driver module in combination meter.
Troubleshooting
Step
1 1) Make sure that:
• Parking brake is completely released.
• Brake fluid level is upper than the minimum level.
Are the check results OK?
2 1) Turn ignition switch to ON position.
Does "ABS" warning lamp come on steady?
Action
Ω
?
5. Combination meter
6. EBD warning lamp (Brake warning lamp)
7. ABS warning lamp
8. Lamp driver module
9. Brake fluid level switch
Action
Yes
Substitute a known-
good ABS hydraulic unit
/ control module
assembly and recheck.
10. Parking brake switch
11. ABS hydraulic unit / control module assembly
12. "ABS" fuse (60 A)
13. "ABS" fuse (10 A)
14. "METER" fuse
Yes
Go to Step 2.
Perform "ABS Warning
Lamp Comes ON
Steady" previously
outlined.
No
"BLK" circuit open or in
high resistance.
S3RH0A4504012
I3RH0A450004-01
No
Release parking brake
completely and/or
replenish brake fluid.
Go to Step 3.