2) Install circlip (1).
3) Drive in dust cover so that dimensions "a" and "b"
become equal as shown in figure.
CAUTION
!
When drive in dust cover, be careful not to
deform it.
4) Caulk with a punch.
5) Insert new hub bolt (1) in hub hole. Rotate hub bolt
slowly to assure that serrations are aligned with
those made by original bolt.
I3RH01220003-01
Front Wheel Disc, Nut and Bearing Check
• Inspect each wheel disc for dents, distortion and
cracks.
A disc in badly damaged condition must be replaced.
• Check wheel nuts for tightness and, as necessary,
retighten them to specification.
Tightening torque
Wheel nut (a): 85 N·m (8.5 kgf-m, 61.5 lb-ft)
I2RH01220037-01
• Check wheel bearing for wear. When measuring
thrust play, apply a dial gauge to wheel hub.
Thrust play limit
0.1 mm (0.004 in.)
I2RH01220038-01
I2RH01220039-01
Front Suspension:
2B-15
I2RH01220040-01
S3RH0A2206012
I2RH01220009-01
I2RH01220010-01