Solenoid Valves (Shift Solenoid Valves, Tcc Solenoid Valve And Timing Solenoid Valve) Removal And Installation - Suzuki Liana RH413 Service Manual

Solenoid Valves (Shift Solenoid Valves, TCC
Solenoid Valve and Timing Solenoid Valve)
Removal and Installation
Removal
1) Disconnect negative cable at battery.
2) Lift up vehicle.
3) Remove engine under covers.
4) Remove drain plug and drain A/T fluid.
5) Install drain plug.
Tightening torque
A/T fluid drain plug: 17 N·m (1.7 kgf-m, 12.5 lb-ft)
6) Remove A/T oil pan (1) and oil pan gasket (2).
7) Remove oil strainer assembly (3).
8) Remove transmission fluid temperature sensor (1)
from sensor clamp.
9) Disconnect solenoid connectors (2).
10) Remove TCC solenoid valve (1), shift solenoid
valve-A (No.1) (2) and shift solenoid valve-B (No.2)
(3) and timing solenoid valve by removing bolts.
S3RH0A5106015
Installation
1) Install shift solenoid valve-A (No.1) (2), shift solenoid
valve-B (No.2) (3), TCC solenoid valve (1) and
timing solenoid valve (4).
Tightening torque
Shift solenoid bolt (a): 11 N·m (1.1 kgf-m, 8.0 lb-
ft)
I2RH0B510054-01
2) Connect solenoid connectors identifying their
installing positions by wire color.
Solenoid coupler
Shift solenoid valve-A (No.1) (2)
I2RH0B510055-01
Shift solenoid valve-B (No.2) (3)
Timing solenoid valve (1)
TCC solenoid valve (4)
Automatic Transmission/Transaxle: 5A-87
I2RH0B510056-01
I3RH0A510016-01
Wire color
White
Black
Yellow
Light green