Suzuki Liana RH413 Service Manual page 512

4E-10 ABS:
Step 1: Malfunction Analysis
Customer complaint analysis
Record details of the problem (failure, complaint) and how it occurred as described by the customer.
For this purpose, use of such a questionnaire form as shown in the following will facilitate collecting information to the
point required for proper analysis and diagnosis.
Customer questionnaire (Example)
I2RH01450014-01
Problem symptom confirmation
Check if what the customer claimed in "Customer Questionnaire" is actually found in the vehicle and if that symptom is
found, whether it is identified as a failure. (This step should be shared with the customer if possible.) Check warning
lamps related to brake system referring to "EBD Warning Lamp (Brake Warning Lamp) Check" and "ABS Warning
Lamp Check".
DTC check, record and clearance
Perform "DTC Check" procedure, record it and then clear it referring to "DTC Clearance".
Recheck DTC referring to "DTC Check".
When DTC which is recorded at DTC check procedure is detected again after performing DTC clearance, go to "Step
4: ABS Check: " to proceed the diagnosis.
When DTC which is recorded at DTC check procedure is not indicated anymore after performing DTC clearance, ABS
control module does not perform the system diagnosis, or temporary abnormality may occur, therefore go to "Step 2:
Driving Test: " to proceed the diagnosis.