Seat Heater Switch (Driver And Passenger Side) Inspection; Seat Heater Wire Inspection - Suzuki Liana RH413 Service Manual

Seat Heater Switch (Driver and Passenger Side) Inspection

1) Confirm that ignition switch is OFF position.
2) Remove parking lever garnish on center console box.
3) Pull out seat heater switch from parking lever garnish.
4) Disconnect seat heater switch coupler.
5) Check for continuity between terminals at each switch position as show below. If check result is not as specified,
replace switch.

Seat Heater Wire Inspection

1) Confirm that seat heater switch is OFF position.
2) Disconnect two couplers of seat heater under the
seat cushion.
3) Check for continuity between terminals as show
below.
If not continuity, replace faulty seat heater.
Seat heater circuit in seat back
Between "a" and "e"
Between "b" and "f"
Between "c" and "d"
Seat heater circuit in seat cushion
Between "g" and "h"
Between "g" and "i"
Terminal
Switch IG
Position
OFF
LO
HI
S3RH0A9706006
LOAD1 LOAD2
I3RH0A970002-01
a b c
g
h i
Seats:
S3RH0A9706005
E
I3RH0A970003-01
e
d f
1
1
2
I3RH0A970004-01
9G-5