Suzuki Liana RH413 Service Manual page 1238

9H-2 Interior Trim:
5) Remove rear center seat belt upper anchor (1) and
cover (2) (for wagon model).
6) Remove assistant grip (1).
7) Remove head lining clips (2) and remove head lining
(3).
3
"A"
"A" "A"
1
2
4. Clip
5. Flat head driver
2
1
I3RH0A980001-01
"A"
"A"
1
5
I2RH01980004-01
Installation
Reverse removal procedure noting the following.
• Tighten sun visor screw to specified torque.
Tightening torque
Sun visor screw (a): 4 N·m (0.4 kgf-m, 3.0 lb-ft)
• Tighten rear center seat belt upper anchor bolt to
specified torque.
Tightening torque
Rear center seat belt upper anchor bolt (a): 35
4
N·m (3.5 kgf-m, 25.5 lb-ft)
I2RH01980005-01
(a)
I3RH01980008-02