9B-7 Lighting Systems:
3) Align headlight aiming to specification by adjusting aiming gear if it is not set properly.
[A]: The illustration shows LH steering vehicle.
Headlight Switch (in Lighting Switch) Removal
and Installation
Removal
1) Disconnect negative cable at battery.
2) Remove steering column hole cover (1).
3) Remove steering column covers (2), and then.
Turn steering wheel to remove steering column
cover screws (3).
2
1
And RH steering vehicle is symmetrical.
2. Headlight housing
3. Aiming (for up / down adjustment)
4. Aiming (for right / left adjustment)
S3RH0A9206004
3
I3RH0A920004-01
X-X: Horizontal center line of headlight bulbs
A-A: Vertical center line of left headlight bulb
B-B: Vertical center line of right headlight bulb
4) Remove lighting switch (1) from combination switch
assembly (2) and disconnect its coupler (3).
Installation
Reverse removal procedure for installation.
I3RH0A920003-01
I2RH01920002-01