Rear Door Window Regulator Removal And Installation - Suzuki Liana RH413 Service Manual

Installation
Reverse removal procedure noting the following
instructions.
• If there is deformity for glass run, replace it with a new
one.
• Tighten door glass front mounting screw (2) first, and
then tighten door rear mounting screw (1).
1
2
• Tighten rear door rear sash lower mounting bolts (1),
and tighten rear door rear sash upper mounting
screws (2, 3) to specified torque.
Tightening order: (1) → (2) → (3)
Tightening torque
Rear door rear sash upper mounting screw ((a)):
2.5 N·m (0.25 kgf-m, 1.5 lb-ft)
3, (a)
2, (a)
1
• Secure door sealing cover (1) with adhesive (2).
1
• Tighten rear door outer weather-strip mounting screw
to specified torque.
Tightening torque
Rear door outer weather-strip mounting screw
((a)): 1.5 N·m (0.15 kgf-m, 1.0 lb-ft)
Rear Door Window Regulator Removal and
Installation
I2RH01950033-01
Removal
1) Remove door glass referring to "Rear Door Glass
Removal and Installation".
2) Disconnect power window motor lead wire at coupler
and loosen clamp.
3) Loosen regulator mounting bolts (1) and nuts (2),
and then remove rear window regulator (3).
1
I2RH01950034-01
Installation
Reverse removal procedure noting the following.
• Tightening order: (1) → (2) → (3)
2
I2RH01950036-01
Glass / Windows / Mirrors:
(a)
3
1
2
9E-12
I2RH01950037-01
S3RH0A9506009
2
I2RH01950038-01
3
I4RH01950012-01