Suzuki Liana RH413 Service Manual page 692

5A-144 Automatic Transmission/Transaxle:
18) Caulk reduction drive gear nut (1).
19) Apply A/T fluid to planetary gear assembly (1), then
fit it to planetary ring gear assembly.
20) Check for correct installation of planetary gear
assembly as follows.
Measure the distance "a" by using micrometer
caliper (1) and straightedge (2). If measured value is
out of specification, remove planetary gear assembly
and reinstall it properly.
Distance between planetary gear assembly and
mating surface of transaxle case
"a": More than 49.9 mm (1.965 in.)
I2RH0B510274-01
1
I2RH0B510275-01
21) Apply A/T fluid to one-way clutch No.2 assembly (1),
then install it to planetary gear assembly. After that,
ensure that planetary carrier rotates only in
counterclockwise direction "A", not in clockwise
direction "B".
22) Install one-way clutch outer race retainer (1).
"a"
2
1
"a"
I2RH0B510276-01
I2RH0B510277-01
I2RH0B510278-01