Windshield Construction - Suzuki Liana RH413 Service Manual

9E-1 Glass / Windows / Mirrors:
Glass / Windows / Mirrors
Body, Cab and Accessories

Windshield Construction

The windshield is installed by using a special type of adhesive (that is, one component urethane adhesive used with
primer). For the Windshield replacement, it is important to use an adhesive which provides sufficient adhesion strength
and follow the proper procedure.
CAUTION
!
• Described is the glass replacement by using 3 types of primers and 1 type of adhesive made by
YOKOHAMA (one component urethane adhesive to be used with primer in combination). When
using primer and adhesive made by other manufacturers, be sure to refer to handling instructions
supplied with them. Negligence in following such procedure or misuse of the adhesive in any way
hinders its inherent adhesive property. Therefore, before the work, make sure to read carefully the
instruction and description given by the maker of the adhesive to be used and be sure to follow the
procedure and observe each precaution throughout the work.
• Should coated surface be scratched or otherwise damaged, be sure to repair damaged part, or
corrosion may start from there.
General Description
1
4
4
3
3
1. Windshield glass 3. Windshield glass stopper
2. Windshield molding 4. Spacer
2
4
: Do not reuse.
S3RH0A9501001
I2RH01950039-01