Suzuki Liana RH413 Service Manual page 988

8B-63 Air Bag System:
DTC Troubleshooting
Step
1 1) With ignition switch OFF, remove center pillar lower
garnish of applicable side then disconnect seat belt
pretensioner connector.
2) Check proper connection to applicable seat belt
pretensioner at terminals in connector "L75" or "L76".
3) If OK, then connect Special Tool (A), (B) and (C) to seat
belt pretensioner connector disconnected at the Step 1).
Special tool
(A): 09932-76010
(B): 09932-75010
(C): 09932-78310
With ignition switch ON, does DTC B1043 or B1047 still
exist?
Action
"L75", "L76"
(A)
(C)
(B)
STEERING WHEEL
Yes
Go to Step 2.
I3RH0A820029-01
No
Turn ignition switch to
OFF position, and
replace seat belt
pretensioner referring to
"Front Seat Belt
Removal and
Installation in Section
8A".