Lspv (Load Sensing Proportioning Valve) Assembly (If Equipped); Lspv (Load Sensing Proportioning Valve); Removal And Installation - Suzuki Liana RH413 Service Manual

LSPV (Load Sensing Proportioning Valve) Assembly (If Equipped)

CAUTION
!
Never disassemble LSPV assembly. Disassembly will spoil its original performance. Replace with new
one if detective.

LSPV (Load Sensing Proportioning Valve)

Removal and Installation

Removal
1) Clean around reservoir cap and take out fluid with
syringe or such.
2) Hoist vehicle.
3) Disconnect brake pipes from LSPV assembly.
4) Remove mounting bolts (3) and adjusting nut (2).
5) Remove LSPV assembly (1) with spring (4) from
vehicle body.
1. LSPV assembly 3. Adjust nut
2. Spring 4. Brake pipe
S3RH0A4106020
I3RH0A410017-01
Brake Control System and Diagnosis:
5. LSPV mounting bolt
: Tightening torque
Installation
1) Install LSPV assembly with spring to vehicle body.
2) Apply multi-purpose grease to upper and lower joint
(1) of coil spring.
4A-23
S3RH0A4106019
I3RH0A410016-01
I3RH0A410018-01
I3RH0A410019-01