Front Fender Components
Front Fender Removal and Installation
Removal
1) Remove splash guard (if equipped) referring to "Splash Guard (If Equipped) Components in Section 9M".
2) Remove front fender lining.
3) Remove front bumper referring to "Front Bumper and Rear Bumper Components in Section 9K".
4) Disconnect connector from side turn signal lamp.
5) Remove front fender.
Installation
Reverse removal procedure to install front fender noting the following instruction.
• If paint on fender bolt is peeled off, be sure to apply paint again.
"A"
1
1. Front fender lining
Hood / Fenders / Doors:
2. Front fender
9J-2
S3RH0A9A06003
2
"A"
I3RH0A9A0003-01
S3RH0A9A06004