Transaxle Rear Cover And O/D And 2Nd Coast Brake Piston Assembly Disassembly And Reassembly - Suzuki Liana RH413 Service Manual

Transaxle Rear Cover and O/D and 2nd Coast
Brake Piston Assembly Disassembly and
Reassembly
Disassembly
CAUTION
!
Do not press O/D and 2nd coast brake return
spring subassembly in over 1.0 mm (0.039
in.).
Excessive compression may cause damage
to O/D and 2nd coast brake return spring
subassembly and/or piston.
1) Remove snap ring by using special tools and
hydraulic press.
Special tool
(A): 09926–96030
(B): 09946–06710
2) Remove O/D and 2nd coast brake return spring
assembly.
1. Transaxle rear cover
3) Apply compressed air (400 – 800 kPa, 4 – 8 kg/cm
57 – 113 psi) to oil hole (2) of transaxle rear cover (1)
to remove O/D and 2nd coast brake piston.
4) Remove O/D and 2nd coast brake piston front O-ring
(1) and rear O-ring (2).
S3RH0A5106044
5) Remove rear cover seal rings (1).
6) Remove rear cover plugs (1).
I2RH0B510201-01
2 ,
I2RH0B510202-01
Automatic Transmission/Transaxle: 5A-127
I2RH0B510203-01
I2RH0B510204-01
I2RH0B510205-01