1J-10 Charging System:
Charging System Specifications
NOTE
The battery used in each vehicle is one of the following three types, depending on specification.
Battery
Battery type
Rated capacity
Electrolyte
Electrolyte S.G.
Generator
Type
Rated voltage
Nominal output
Permissible max. speed
No-load speed
Regulated voltage
Exposed brush length
Permissible ambient temperature
Polarity
Rotation
Tightening Torque Specifications
Fastening part
Body ground bolt
NOTE
The specified tightening torque is also described in the following.
"Generator Dismounting and Remounting"
"Generator Components"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Fasteners Information in Section 0A".
Specifications
AH/5HR, 12 Volts
L (US / lmp pt.)
38B20L
28
2.1 (4.44 / 3.70)
1.28 when fully charged at 20 °C (68 °F)
75 A type
12 V
75 A
18,000 r/min.
1020 r/min. (rpm)
14.2 – 14.8 V (Hi), 12.5 – 13.1 V (Lo)
Standard: 10.5 mm (0.41 in.)
Limit: 1.5 mm (0.05 in.)
–30 to 90 °C (–22 to 194 °F)
Negative ground
Clockwise viewed from pulley side
Tightening torque
N⋅m
kgf-m
8.0
0.8
S3RH0A1A07001
55B24L
75D23L
38
2.8 (5.92 / 4.93)
3.9 (8.24 / 6.86)
S3RH0A1A07002
Note
lb-ft
6.0
54