Suzuki Liana RH413 Service Manual page 656

5A-108 Automatic Transmission/Transaxle:
40) Remove O/D and 2nd coast brake rear plate (1),
discs (2), separator plate (3) and retaining plate (4).
41) Remove forward clutch hub (1).
42) Remove rear sun gear thrust bearing (1) from
forward clutch hub (2).
NOTE
If rear sun gear thrust bearing is not found on
forward clutch hub, it may have been left in
transaxle.
43) Remove rear sun gear thrust bearing race (1).
44) Remove rear planetary sun gear subassembly (1)
and one-way clutch No.1 assembly (2).
I2RH0B510113-01
45) Remove planetary gear thrust bearing (1).
NOTE
If planetary gear thrust bearing is not found
on one-way clutch No.1 assembly, it may
have been left in transaxle.
46) Remove one-way clutch No.1 assembly (2) from rear
planetary sun gear subassembly (3).
I2RH0B510114-01
47) Remove planetary carrier thrust washer (1).
I2RH0B510115-01
48) Remove O/D and 2nd coast brake retaining plate
snap ring (1).
I2RH0B510116-01
I2RH0B510117-01
I2RH0B510118-01
I2RH0B510119-01