Suzuki Liana RH413 Service Manual page 696

5A-148 Automatic Transmission/Transaxle:
"a"
1
"a"
42) After applying A/T fluid to O/D and 2nd coast brake
retaining plate (4), separator plate (3), discs (2) and
rear plate (1), install them to transaxle case (5).
43) Measure O/D and 2nd coast brake piston stroke.
• Measure dimension "a" from end face of transaxle
case to O/D and 2nd coast brake rear plate (1)
using straightedge and micrometer caliper.
• Measure dimension "b" from O/D and 2nd coast
brake piston (2) to rear cover assembly mating
surface using straightedge and micrometer
caliper.
• Calculate piston stroke from measured value of
dimensions "a" and "b".
• Piston stroke = "a" – "b"
O/D and 2nd coast brake piston stroke
Standard: 0.65 – 1.05 mm (0.026 – 0.041 in.)
When piston stroke is out of specification, select O/D
and 2nd coast brake rear plate with proper thickness
from among the list below and replace it.
2
I2RH0B510296-01
I2RH0B510297-01
44) After applying A/T fluid to new 2nd brake gaskets (1),
CAUTION
!
When brake disc, retaining plate, separator
plate and/or rear plate of O/D and 2nd coast
brake have been replaced, all learned
contents, which have been stored in TCM
memory by executing learning control,
should be initialized referring to "Learning
Control Initialization".
Neglecting this initialization may cause
excessive shift shock.
Available O/D and 2nd coast brake rear plate
thickness
Thickness
1.8 mm (0.071 in.)
2.0 mm (0.079 in.)
2.2 mm (0.087 in.)
2.4 mm (0.094 in.)
2.6 mm (0.102 in.)
install them to transaxle case (2).
Identification mark
1
2
3
4
5
I2RH0B510298-01
I2RH0B510299-01