Rearend Door Window (For Wagon Model) Components; Rearend Door Glass (For Wagon Model) Removal And Installation - Suzuki Liana RH413 Service Manual

Rearend Door Window (for Wagon Model) Components

1. Rearend door panel

Rearend Door Glass (for Wagon Model) Removal and Installation

Refer to "Windshield Removal and Installation" as removal and installation procedures are basically the same.
However, note the following.
• Observe the following precautions when applying adhesive (1) along glass (2) edge.
• Adhesive (1) should be applied evenly especially in height.
• Be careful not to damage primer (3).
• With the position of fastener (4) properly aligned, install glass (2) on rearend door panel (5).
• Press glass against body quickly after adhesive (1) is applied.
Adhesive amount specifications and position for rearend door glass
Height "a": 14 mm (0.55 in.)
Width "b": 7 mm (0.28 in.)
Width "c": 16 mm (0.63 in.)
Position "d": 14 mm (0.55 in.) for glass upper and side sections
Position "d": 15 mm (0.59 in.) for glass bottom section
2. Rearend door glass 3. Spacer
Glass / Windows / Mirrors:
4. Fastener 5. Rearend door glass trim
9E-14
S3RH0A9506012
I2RH01950054-01
S3RH0A9506013
I4RH01950013-01