Suzuki Liana RH413 Service Manual page 455

1. Propeller shaft No. 1 4. Propeller shaft center support bracket
3. Propeller shaft No. 2
Tightening Torque Specifications
Fastening part
Propeller shaft No.1 bolt
Propeller shaft No.2 bolt
Center coupling bolt
Center support nut
NOTE
The specified tightening torque is also described in the following.
"Propeller Shaft Components"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Fasteners Information in Section 0A".
Propeller Shaft Inspection
1) Check propeller shaft connecting bolts for
looseness. If looseness is found, tighten to specified
torque.
2) Check propeller shaft joints for wear, play and
damage. If any defect is found, replace.
3) Check propeller shaft center support for biting of
foreign matter, crack, abnormal noise and damage. If
any defect is found, replace.
I3RH0A340002-01
Specifications
Tightening torque
N⋅m kgf-m
23 2.3
23 2.3
23 2.3
50 5.0
Propeller Shafts:
S3RH0A3406002
S3RH0A3407001
Note
lb-ft
17.0
17.0
17.0
36.5
3D-3