Suzuki Liana RH413 Service Manual page 483

Tightening Torque Specifications
Fastening part
LSPV adjust nut
Front brake caliper bleeder plug
Front brake caliper bleeder plug
Rear wheel cylinder bleeder plug
Master cylinder fixing nut
Brake pipe flare nut
Piston stopper bolt
Booster mounting nut
Right side engine mounting bolt
Engine mounting bracket nut
Clevis lock nut
Clevis lock nut
LSPV mounting bolt
NOTE
The specified tightening torque is also described in the following.
"Front Brake Hose / Pipe Construction"
"Rear Brake Hose / Pipe Construction"
"Master Cylinder Components"
"Brake Booster Components"
"LSPV (Load Sensing Proportioning Valve) Assembly (If Equipped)"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Fasteners Information in Section 0A".
Brake Control System and Diagnosis:
Specifications
Tightening torque
N⋅m kgf-m
23 2.3
8.5 0.85
11.0 1.1
8.5 0.85
13 1.3
16 1.6
10 1.0
13 1.3
55 5.5
75 7.5
25 2.5
19 1.9
23 2.3
S3RH0A4107001
Note
lb-ft
17.0 / /
(for NISSIN made
6.5
caliper)
(for other than NISSIN
8.0
made caliper)
6.5
9.5
11.5 /
(for LH steering
7.5
vehicle)
9.5
40.0
54.5
18.5 (LH steering vehicle)
14.0 (RH steering vehicle)
17.0
4A-25