Front Wheel Hub And Steering Knuckle Disassembly And Assembly - Suzuki Liana RH413 Service Manual

2B-14 Front Suspension:
Front Wheel Hub and Steering Knuckle
Disassembly and Assembly
Disassembly
1) Uncaulk and remove dust cover (1).
2) Remove circlip.
3) Using hydraulic press (1) and special tool, remove
wheel bearing.
Special tool
(A): 09913-75520
CAUTION
!
When installing wheel bearing, replace it with
new one.
4) Remove wheel bearing outside inner race (1).
Special tool
S3RH0A2206011
(C): 09913-65810
(D): 09913-85230
I2RH01220032-01
5) Remove hub bolts (1) with copper hammer or
hydraulic press.
CAUTION
!
Never remove bolt unless replacement is
necessary.
Be sure to use a new bolt for replacement.
I2RH01220033-01
Assembly
1) Face grooved rubber seal side (1) of new wheel
bearing (2) upward as shown in figure and press-fit it
into knuckle using special tool.
Special tool
(A): 09913-75510
CAUTION
!
When installing wheel bearing, replace it with
new one.
I3RH0A220006-01
I2RH01220035-01