9J-3 Hood / Fenders / Doors:
Front Door Assembly Components
1. Door panel
2. Door hinge
: Apply lithium grease 99000-25010 to rotating part.
: Apply sealant 99000-31110 to contact face.
Front Door Assembly Removal and Installation
Removal
1) Remove front fender referring to "Front Fender
Components".
2) Disconnect door harness lead wires at each coupler.
3) Remove front door opening weather-strip.
4) Remove door open stopper (1).
6
5
28 N·m (2.8 kg-m)
2
S3RH0A9A06006
I2RH019A0002-01
1
4
3
4
3. Door open stopper
5. Door open stopper bolt
4. Front door hinge bolt
6. Front door opening
5) Support door panel (1) using a jack (2) with rags (3)
and a piece of wood (4) placed between jack (2) and
panel (1) as shown.
6) Remove door assembly (1) by loosening hinge
mounting bolts (2).
23 N·m (2.3 kg-m)
23 N·m (2.3 kg-m)
: Tightening torque
weather-strip
1
2
S3RH0A9A06005
I4RH019A0002-01
I2RH019A0003-01
I2RH019A0004-01