Sensor Plate Inspection - Suzuki Liana RH413 Service Manual

• If necessary, regrind crankshaft journal and select
undersize bearing to use with it as follows.
a. Regrind journal to the following finished diameter.
Finished journal diameter
For M13 engine: 44.7320 – 44.7500 mm (1.7611
– 1.7618 in.)
For M16 engine: 51.7320 – 51.7500 mm (2.0367
– 2.0374 in.)
b. Using micrometer, measure reground journal
diameter.
Measurement should be taken in two directions
perpendicular to each other in order to check for
out-of-round.
c. Using journal diameter measured above and
alphabets stamped on cylinder block, select an
undersize bearing by referring to the following
table.
Check bearing clearance with newly selected
undersize bearing.
New standard undersize crankshaft main
bearing specification
[For M13 engine]
Measured journal diameter
44.7320 –
44.7379 mm
(1.7611 –
1.7613 in.)
Alphabet A Red and
s Brown
stamped B Red and
on Green
cylinder C Red and
block Black
Undersize bearing to be installed
I2RH0B140144-01
44.7440 –
44.7380 –
44.7500
44.7439 mm
mm
(1.7614 –
(1.7616 –
1.7615 in.)
1.7618 in.)
Red and Red and
Purple Pink
Red and Red and
Brown Purple
Red and Red and
Green Brown
[For M16 engine]
Measured journal diameter
51.7320 –
51.7379 mm
(2.0367 –
2.0369 in.)
Alphabet A Red and
s Green
stamped B Red and
on Black
cylinder C Red only
block
Undersize bearing to be installed
Bearing Cap Bolt
Measure each thread diameter bearing cap bolts (1) at
"A" and "B" by using a micrometer (2).
Calculate difference in diameters ("A" – "B").
If it exceeds limit, replace with new one.
Bearing cap No.1 bolt diameter measurement points
"a": 60 mm (2.36 in.)
"b": 90 mm (3.54 in.)
Bearing cap No.1 bolt diameter difference
Limit: ("A" – "B"): 0.2 mm (0.008 in.)
1
"a"
1

Sensor Plate Inspection

Check sensor plate for crack damage.
If malcondition is found, replace it.
Engine Mechanical: 1D-54
51.7380 – 51.7440 –
51.7439 mm 51.7500 mm
(2.0370 – (2.0372 –
2.0371 in.) 2.0374 in.)
Red and Red and
Brown Purple
Red and Red and
Green Brown
Red and Red and
Black Green
"A" "B"
"b"
2
I2RH0B140145-01
S3RH0A1406049
I3RH0A140013-01