Suzuki Liana RH413 Service Manual page 1248

9J-9 Hood / Fenders / Doors:
3) Remove trunk room side trim.
4) Remove torsion bars (1).
5) Fold rear seat back forward.
6) Remove high mounted stop light (if equipped).
1
1. High mounted stop light stay
Installation
Reverse removal procedure noting the following.
• Install torsion bars as following:
a. Open trunk lid and hold it.
b. Distinguish torsion bar ([A]) from ([B]) by end shape (1).
c. Insert end (1) into hole of partition side panel (3) and fit end (2) to groove partition side panel of right side hinge.
d. Insert end (1) into hole of partition side panel (3) and fit end (2) to groove partition side panel of left side hinge.
[A]
[B]
1
1
I2RH019A0015-01
I2RH019A0016-01
2
1
2
[A]: Left side torsion bar
[B]: Right side torsion bar
7) Remove tether anchorage (1) and rear center seat
belt cover then remove partition trim.
8) Remove hinge attaching bolts (1) and take out trunk
lid hinges.
3
1
I2RH019A0017-01
1
I2RH019A0018-01
I4RH019A0006-01