Front Suspension
Suspension
Front Suspension Construction
1. Strut assembly
2. Stabilizer bar
3. Steering knuckle
4. Wheel
NOTE
• Strut bracket nut (for 12.9 strength bolt) is pre-coated with friction stabilizer and provided with
marks indicating the strength class. Never reuse this nut to prevent it from loosening. Be sure to
replace nut with a new one whenever loosening once.
• Be sure to use a bolt and nut in the right combination which is specified.
General Description
5. Suspension control arm
6. Vehicle body
7. Drive shaft
8. Tie-rod
9. Brake disc
10. Rubber cap
[A]: 8.8 strength bolt & nut
11. Stabilizer bar joint
[B]: 12.9 strength bolt & nut (See NOTE.)
: Tightening torque
Front Suspension:
S3RH0A2201001
I3RH0A220010-03
: Do not reuse.
2B-1