Heater Unit Components; Heater Unit Removal And Installation - Suzuki Liana RH413 Service Manual

7A-16 Heater and Ventilation:

Heater Unit Components

12
7
10
1. Heater core
2. Air resistive board
3. Blower motor controller
4. Temperature selector door

Heater Unit Removal and Installation

Removal
1) Disconnect negative (–) cable at battery.
2) Drain engine coolant, and then disconnect heater
hoses (1) from heater unit.
3) Remove heater unit mounting nuts (2).
9
4
9
1
5. Air flow selector door
6. Air flow selector link assembly
7. Temperature selector link assembly
8. Packing
S3RH0A7106009
2
1
I2RH01710013-01
5
20
6
6
10
6
9. Heater case
10. Foot air nozzle
11. Air resistive side case
12. Temperature control actuator
4) Remove instrument panel referring to "Instrument
Panel Removal and Installation in Section 9C".
5) Remove blower unit (1) referring to Step 4) to 6) of
"Blower Unit Removal and Installation".
6) Remove drain hose (2) from vehicle body.
7) Remove heater unit (3) from vehicle body.
3
Installation
Reverse removal procedure to install heater unit noting
the following instructions.
• When installing each part, be careful not to catch any
cable or wiring harness.
• Fill engine coolant to radiator.
S3RH0A7106008
2
11
3
I3RH0A710012-01
13. Air flow control actuator
: Do not reuse.
2
I3RH0A710020-01
8
1