Suzuki Liana RH413 Service Manual page 684

5A-136 Automatic Transmission/Transaxle:
Reassembly
1) After applying A/T fluid to new O-rings, fit them to
housing plugs. Finally install plugs to torque
converter housing.
Tightening torque
Torque converter housing plug (a): 7.5 N·m (0.75
kgf-m, 5.5 lb-ft)
2) Using special tools, assemble differential side RH
bearing cup.
Special tool
(A): 09924–74510
(B): 09944–68210
3) Using special tool, install countershaft RH bearing
cup.
Special tool
(A): 09913–75520
4) Using special tools, install new differential side oil
seal to torque converter housing.
Special tool
(A): 09924–74510
(B): 09944–88220
Differential side oil seal installing depth
"a": 2.6 – 3.6 mm (0.10 – 0.14 in.)
5) Apply grease to oil seal lip.
: Grease 99000–25030
I2RH0B510242-01
6) Install lubrication LH tube (1) and RH tube (2).
7) Install fluid reservoir RH plate (1) and lubrication
tube clamp (2).
I2RH0B510243-01
Tightening torque
Lubrication tube clamp bolt (a): 5.5 N·m (0.55
kgf-m, 4.0 lb-ft)
Fluid reservoir RH plate bolt (b): 5.5 N·m (0.55
kgf-m, 4.0 lb-ft)
I2RH0B510244-01
I2RH0B510245-02
I2RH0B510237-01
I2RH0B510246-01