Specifications; Tightening Torque Specifications; Special Tools And Equipment; Recommended Service Material - Suzuki Liana RH413 Service Manual

3) Install parking brake cable (3) to brake back plate
(1).
2. Cable stopper ring

Tightening Torque Specifications

Fastening part
Brake drum screw
Wheel nut
Wheel cylinder mounting bolt
Rear brake pipe flare nut
Brake back plate bolt
NOTE
The specified tightening torque is also described in the following.
"Rear Drum Brake Components"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Fasteners Information in Section 0A".

Recommended Service Material

Material
Water tight sealant
NOTE
Required service material is also described in the following.
"Rear Drum Brake Components"
I2RH01430026-01

Specifications

Special Tools and Equipment

SUZUKI recommended product or Specification
SUZUKI Sealing Compound 366E
4) Install wheel hub referring to "Wheel Hub with Wheel
Bearing and Wheel Stud Removal and Installation
(2WD Model) in Section 2C" or "Wheel Hub, Wheel
Stud / Wheel Bearing Outside Inner Race Removal
and Installation (4WD Model) in Section 2C".
5) Install wheel cylinder, and tighten wheel cylinder
bolts and brake pipe flare nut to specified torque.
Refer to "Wheel Cylinder Removal and Installation".
6) For procedure hereafter refer to "Wheel Cylinder
Removal and Installation".
Tightening torque
N⋅m kgf-m
8 0.8
85 8.5
12 1.2
16 1.6
50 5.0
P/No.: 99000–31090
Rear Brakes:
S3RH0A4307001
Note
lb-ft
6.0
61.5 /
9.0
11.5
36.5
S3RH0A4308001
Note
4C-7