DTC Troubleshooting
Step
1
1) With ignition switch OFF, disconnect passenger air bag
(inflator) module connector "L35".
2) Check proper connection to passenger air bag (inflator)
module at terminals in connector "L35".
3) If OK, then connect Special Tool (A), (B) and (C) to
passenger air bag (inflator) module connector "L35"
disconnected at the step 1).
Special tool
(A): 09932–76010
(B): 09932-75010
(C): 09932-78340
With ignition switch ON, does DTC B1015 still exist?
Action
(A)
"L35"
STEERING WHEEL
Go to Step 2.
(D)
(B)
I3RH0A820022-01
Air Bag System:
Yes
Ignition switch OFF.
Replace passenger air
bag (inflator) module
referring to "Passenger
Air Bag (Inflator) Module
Removal and
Installation".
8B-30
No