Information Display Or Clock Removal And Installation; Radio Assembly Removal And Installation - Suzuki Liana RH413 Service Manual

9C-15 Instrumentation / Driver Info. / Horn:
12) Remove instrument panel (2) with steering column,
steering support member (3) and instrument panel
harness.
1
3
1
2
Installation
Reverse removal procedure noting the following.
• When installing each part, be careful not to catch any
cable or wiring harness.
• Tighten steering support member support bolts to
specified torque
Tightening torque
Steering support member support bolts (a): 23
N·m (2.3 kgf-m, 17.0 lb-ft)
• Install steering lower shaft referring to "Steering
Column Assembly Removal and Installation in Section
6B".
• Enable air bag system referring to "Enabling Air Bag
System in Section 8B".
Information Display or Clock Removal and
Installation
Removal
1) Remove information display or clock garnish (1) from
instrument panel (2) pulling it arrow direction as
shown.
2) Remove 2 mounting screws of information display or
clock (3).
3) Remove information display or clock (3) from
instrument panel (2).
4) Disconnect information display or clock coupler.
1
1
1
I3RH0A930008-01
(a)
I2RH01930016-01
S3RH0A9306017
2
Installation
Reverse removal procedure.

Radio Assembly Removal and Installation

Removal
1) Disconnect negative (–) cable at battery.
2) Remove instrument panel center garnish trims (1)
from instrument panel (2).
3) Remove 4 mounting screws (3).
4) Tilt instrument panel center garnish (4) and pull it
through from instrument panel.
1
1
2
3
I3RH0A930009-01
S3RH0A9306018
2
2
3
4
I3RH0A930010-01