Suzuki Liana RH413 Service Manual page 702

5A-154 Automatic Transmission/Transaxle:
76) Connect solenoid connectors to solenoid valves
identifying their installing positions by wire colors,
and install transmission fluid temperature sensor to
its clamp.
Solenoid valve coupler specification
Solenoid valve coupler
Shift solenoid valve-A (1)
Shift solenoid valve-B (2)
Timing solenoid valve (3)
TCC / Lock-up solenoid valve (4)
Pressure control solenoid valve (5)
Transmission fluid temperature
sensor (6)
77) Install oil strainer assembly (1).
Tightening torque
Oil strainer bolt (a): 10 N·m (1.0 kgf-m, 7.5 lb-ft)
78) Install oil cleaner magnets (1) in oil pan (2).
NOTE
If metal particles are attached to the magnets,
clean them before installing.
I2RH0B510323-01
Wire color
White
Black
Yellow
Light Green
Gray + Green
79) Install new oil pan gasket (1) between transaxle case
Orange
and oil pan (2).
Tightening torque
Oil pan bolt (a): 7.0 N·m (0.7 kgf-m, 5.0 lb-ft)
80) After applying A/T fluid to new O-rings, fit it to fluid
I2RH0B510324-01
cooler pipe unions (1). Then install fluid cooler pipe
unions to transaxle case.
Tightening torque
Fluid cooler pipe union (a): 25 N·m (2.5 kgf-m,
18.0 lb-ft)
I2RH0B510325-01
I2RH0B510326-01
I2RH0B510327-01