Input Shaft And Countershaft Components - Suzuki Liana RH413 Service Manual

Assembly
1) If oil gutter has been removed, install it with bolt to
which thread lock cement has been applied.
"A": Thread lock cement 99000–32110
Tightening torque
Oil gutter bolt (a): 10 N·m (1.0 kgf-m, 7.5 lb-ft)

Input Shaft and Countershaft Components

1. Input shaft
2. Oil seal
: Apply grease 99000-25010 to oil seal lip.
3. Input shaft right bearing
4. Input shaft 3rd gear
5. Needle bearing (resin cage type)
6. High speed synchronizer ring
7. High speed synchronizer spring
8. High speed sleeve & hub
9. High speed synchronizer key
10. Circlip
12. Input shaft left bearing
13. Circlip
14. 5th gear spacer
15. Countershaft right bearing
16. Countershaft
17. Countershaft 1st gear
18. Low speed synchronizer ring
19. Low speed synchronizer spring
20. Low speed sleeve & hub
21. Low speed synchronizer key
Manual Transmission/Transaxle:
23. Center cone
24. 2nd gear synchronizer inner ring
25. Circlip
26. Countershaft 2nd gear
27. Countershaft 3rd gear
28. 3rd & 4th gear spacer
29. Countershaft 4th gear
30. Countershaft left bearing
: Do not reuse.
: Apply transaxle oil.
5B-26
I2RH01520043-01
S3RH0A5206018
I3RH0A520017-01