Washer Tank And Washer Pump Removal And Installation; Washer Pump Inspection; Windshield Wiper Motor Inspection - Suzuki Liana RH413 Service Manual

Table of Contents

Advertisement

9D-3 Wipers / Washers:
Washer Tank and Washer Pump Removal and
Installation
Removal
1) Disconnect negative (–) cable at battery.
2) Remove front bumper referring to "Front Bumper
and Rear Bumper Components in Section 9K".
3) Remove front fender lining (LH) referring to "Front
Fender Components in Section 9J".
4) Remove washer tank attaching bolts (4).
5) Disconnect washer pump lead wire couplers and
hoses.
6) Remove washer tank (1).
7) Remove windshield washer pump (2) and rear
washer pump (3) from washer tank (1).
Installation
Reverse removal procedure.

Washer Pump Inspection

1) Connect battery positive (+) and negative (–)
terminals to pump (+) and (–) terminals respectively.
2) Check motor operation for both windshield and rear
(if equipped) washer pump.
If check result is not satisfied, replace washer pump.

Windshield Wiper Motor Inspection

NOTE
S3RH0A9406002
Make sure that battery voltage is 12 V or
more.
Motor Operation in Low Speed
1) Connect battery positive (+) terminal to terminal "L"
and its negative (–) terminal to terminal "E".
2) Check if motor revolution speed is as specification. If
check result is not as specified, replace motor.
Specification
44 – 52 r/min (rpm)
Motor Operation in High Speed
1) Connect battery positive (+) terminal to "H" and its
negative (–) terminal to terminal "E".
2) Check if motor revolution speed is as specification. If
check result is not as specified, replace motor.
Specification
64 – 78 r/min (rpm)
Automatic Stop Operation
1) Connect battery positive (+) terminal to terminal "L"
and its negative (–) terminal to terminal "E" and let
the motor turn.
2) Disconnect terminal "L" from battery positive (+)
I2RH01940008-01
terminal, and let the motor stop.
3) Connect terminals "L" and "S" with a jumper wire,
and connect terminal "B" to battery positive (+)
terminal. Observe the motor turns once again then
stops at a specified position.
S3RH0A9406003
I2RH01940009-01
[A]: LH steering vehicle
[B]: RH steering vehicle
S3RH0A9406004
I3RH0A940001-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Liana rh416

Table of Contents