Turn Signal Light Switch (In Lighting Switch) Removal And Installation; Turn Signal Light Switch (In Lighting Switch) Inspection - Suzuki Liana RH413 Service Manual

Turn Signal Light Switch (in Lighting Switch)
Removal and Installation
Removal
1) Disconnect negative (–) cable at battery.
2) Remove steering column hole cover (1).
3) Remove steering column covers (2), and then.
Turn steering wheel to remove steering column
cover screws (3).
2
1

Turn Signal Light Switch (in Lighting Switch) Inspection

Check for continuity between terminals at each switch position. If check result is not as specified, replace switch.
S3RH0A9206011
3
I3RH0A920004-01
[A]: LH steering vehicle
4) Remove lighting switch (1) from combination switch
(2) and disconnect its coupler (3).
Installation
Reverse removal procedure.
[B]: RH steering vehicle
Lighting Systems: 9B-10
I2RH01920013-01
S3RH0A9206012
I3RH0A920009-01