Headlight Switch (in Lighting Switch) Inspection
Check for continuity between terminals at each switch position as shown in the following figure. If check result is not as
specified, replace switch.
Headlight Leveling Switch (If Equipped)
Inspection
Check for resistance between terminals at each switch
position as shown. If check result is not as specified,
replace switch.
Position
Terminals
–
+IG and GND
0
1
• SIG-R and GND
2
• SIG-L and GND
3
4
[A]: LH steering vehicle
S3RH0A9206018
Resistance (KΩ)
3.7 – 5.6
4.0 – 4.5
3.4 – 3.8
2.8 – 3.2
2.2 – 2.5
1.6 – 1.8
I3RH0A920006-01
[B]: RH steering vehicle
Headlight Diode Removal and Installation
Removal
1) Disconnect negative (–) cable at battery.
2) Remove glove box from instrument panel.
3) Remove headlight diode (1) from main harness (2)
as shown in figure.
Lighting Systems:
9B-8
S3RH0A9206005
I3RH0A920005-01
S3RH0A9206006
1
2
I3RH0A920007-01